|
|
Sports relaxation center Lipno
Schuster, Miloš ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
This diploma thesis consists of a project of a sports relaxation centre in Lipno. The object is designed to be suitable for accommodation, catering and sports purposes. The building has atypical floor plan with a flat roof above the accommodation and catering sections. Above the part for sports purposes there is a sloping roof. In the basement, a corridor for running, a technical room and wellness facilities such as whirlpool, sauna and massages, could be found. On the first floor, there is catering section, in the southern part of the first floor there is accommodation section and in the northern part sports hall, gym and squash courts with appropriate facilities. The second floor copies the first floor with its similar purposes besides the fact that there is no catering section.
|
|
|
Recreational facilities Náklo
Vymětal, Jaromír ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The subject of the diploma thesis is a new building of a recreational pension with restaurant and wellness facilities in Náklo. It is a multi-storey building with three above-ground and one underground floors, located near Lake Kobylnik. The accommodation capacity of the boarding house is 26 beds. The proposal respects both the municipal plan and the existing surrounding area. It has a rugged floor plan with a central staircase. The vertical supporting structures are made of sand-lime blocks. Ceiling structures are made of prestressed reinforced concrete panels with cavities and reinforced concrete monolithic panels. The object of the holiday house has two types of roofing. Classical sloping saddle roof and flat roof above the central part. A water surface and a recreational area are designed on the parcels concerned. The proposed building is situated in a perspective area for tourism, near the Litovelské Pomoraví Protected Landscape Area.
|
|
|
Detached house
Fazekas, Dávid ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
The subject of this thesis is two-storey wooden basement house. The building plot is located in Brno. The House is designed with the view of surrounding buildings and the location. The House will be used for living of a family of five members. The plan view of the House is almost rectangular. The main entrance and the driveway to the House is at 1st floor level. The vertical walls are formed by a wooden frame with thermal insulation sheathed on both sides of wood chip boards and plasterboards. The ceiling structure is made of wooden beams with embedded insulation. The detached house is covered with two sloping shed roofs. The project was prepared by a computer program called Nemetschek Allplan..
|
|
|
Detached house with a dentist’s surgery
Pilný, Ondřej ; Krejsa, Jan (referee) ; Kacálek, Petr (advisor)
The present bachelor’s thesis processed a desing of a newly-built single-family house in the city of Chlum u Hradce Králové. The desing is concerned with a detached building with two floors and partial basement, dentist’s surgery and swimming pool. The house is designed for a family of four members. The structural systém of Kalksandstein sand-lime blocks was chosen for the designed building. The ceiling structure is created with prestressed ceiling panels SPIROLL. The thermal insulation is provided by the ETICS systém and by the ventilated facade with air gap with panelling of fibre cement boards CEMBRIT. The building is roofed with a flat and sloping roof.
|
|
|
Apartment building
Hradilová, Tereza ; Žajdlík, Tomáš (referee) ; Čuprová, Danuše (advisor)
Subject of the bachelor thesis is detail design documentation of an apartment building. Proposed apartment building is located in the Zlín region in the foothills of the Hostýn Hills in the outskirts of the village Chomýž. Building is located on the cadastral number 3240 and 3238/1 in the cadastral area of Chomýž. The apartment building contains 6 apartments. In the basement are designed cellar cubicles, warehouses, drying room, utility room and room for house maintenance. On the first floor there are two apartments, a cleaning room and a pram room. There are only apartments on the second and third floor. Residential building is designed as a basement, three-storey, the last floor is a residential attic. The building will have a gabled roof with a slope of 35 ° and with dormer windows. The structural system of a residential building is a combination of longitudinal and transverse. The foundations are made of concrete foundation strips. The perimeter load-bearing masonry is in the basement of concrete blocks of permanent shuttering, in the above-ground floors of ceramic blocks, as well as the vertical support system inside the building. The ceiling structure on all floors consists of a composite ceramic-concrete ceiling made of POT beams and MIAKO inserts. The staircase is designed as monolithic reinforced concrete. Thermal insulation of apartment building is designed as polystyrene.
|
|
|
Apartment building
Marek, Václav ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The subject of this bachelor thesis is a new building of an apartment house in Chotěboř. The apartment building is designed from the four-storey part and from the five-storey part, the floors are finished with a residential attic. The apartment building is connected to the existing housing development, installed in a slightly sloping terrain. The apartment building contains seventeen housing units, the apartments are designed for housing four-member families, while apartments of the studio type are designed for two persons. The first floor is designed for the technical facilities of the building, there is also a commercial area that is considered for the operation of a hairdresser. Other above-ground floors consist of housing units. The apartment house is covered with a saddle seddle roof, in the part of the fifth floor there is also an outdoor terrace with a flat roof. The vertical load-bearing and non-load-bearing structures are formed by the Porotherm brick system. Horizontal ceiling structures are designed as a monolithic reinforced concrete slab. The foundation structures are made of monolithic concrete and monolithic prefa. The parking space is designed outside the building, with parking for the disabled. The project was developed in the ArchiCad graphics program. All constructions comply with valid standards and regulations.
|
|
|
Municipal Services Building in Žďárná
Musilová, Adéla ; Kolářová, Eva (referee) ; Kolář, Radim (advisor)
The master’s thesis deals with the design of Municipal services building in Žďárná. The building is located in the center of the village Žďárná in the South Moravian region. The building is set in a sloping terrain. Municipal services building is divided into 2 buildings: SO.01 Municipal building and SO.02 Health Center. SO.01 Municipal services building can be divided into two parts – the first part is two-storey with partial basement and it is covered by sloping roof made of wooden trusses. The second part is single storey with partial basement and it is covered with flat roof. SO.02 Health Center has one floor and it is roofed with a flat roof. The building SO.01 Municipal services building is functionally divided into 4 parts – 01 municipal office, 02 hairdresser, 03 post office and 04 garage. The building SO.02 Health Center is functionally divided into 2 parts – 01 pharmacy and 02 doctor’s office. The building is designed as masonry construction. Horizontal load-bearing structure is made of monolithic reinforced concrete ceiling. Each floors and connected by reinforced concrete stairs and by an elevator. The building SO.01 Municipal services building is insulated with contact thermal insulation system. The building SO.02 Health Center has ventilated façade, the insulation is made of mineral wool boards and the cladding is made of compact HPL laminate boards.
|
|
|
Municipal authority with primary school
Maděránek, Martin ; Donaťák, Vladislav (referee) ; Donaťáková, Dagmar (advisor)
The thesis is developed in the form of project documentation containing all requirements according to applicable regulations. The project addresses the new building freestanding buildings, municipal office with an elementary school. The building is a partial basement, three floors and basement. In the basement is the technical background of the building, utility room, machine room and communication space. On the first floor there are areas of the municipal office, library, parent center and game room with toilets. The second and third floors above ground occupied spaces elementary school. On the second floor we find classrooms, changing rooms and toilets. On the third floor is a dining room, suite, staffroom teachers and toilets. The project also includes dispositional studies, two special projects, assessment of buildings and structures in terms of building physics, or fire safety design of the building.
|
|
|
Residential House
Lukeš, Martin ; Bartoš, Tomáš (referee) ; Mohelníková, Jitka (advisor)
New residential house in Brno – Kohoutovice. Residential house is a detached building in a slightly sloping terrain to the south with two floors. The house has no basement. The vertical and horizontal load-bearing structure are of the system VELOX. The construction of sloping roof is dealt with trussed rafter. The layout of the house includes main flat unit and on the north side adjacent garage. The main building is covered with a gable roof and garage with shed roof.
|
|
|
Fire station P3 in Hlučín
Komárková, Jana ; Klímek, Karel (referee) ; Čuprová, Danuše (advisor)
The subject of the diploma thesis is a new building of the P3 fire station in Hlučín. The facility will be used to perform the fire protection service of the population of the district fire brigade and municipal volunteer fire fighters. The fire station is designed as an isolated structure of rectangular shape, which is divided into three parts, and it is operationally and structurally interconnected. First part is partly underground two-storey administrative. The second part of the building is an exit garage and the third part forms of the technical background of the fire station. The object is designed as classic brick technology from Porotherm ceramic blocks on reinforced concrete base strips. The roof of part of fire and garage facilities is saddle, the roof of the technical background is flat.
|
guest ::
